生産上の利點

ホーム>生産上の利點

FPC

Drilling

Drill Hole Size : Ø0.1~6.2mm

Processed Material: Flexible Copper Clad Laminate (FCCL)、Cover film、EMI Film、PET、ITO Film

Maximum Drill Size: 400*450mm

Maximum Capacity: 60,000 cut/hr

Electroplating

Processed Material: Flexible Copper Clad Laminate (FCCL)、Triplex

Board Thickness: 0.4~1.6mm

Maximum Board Size:250*420mm

Maximum Capacity:67.5Panel/hr(by250*420mm)

Exposure

Processed Material: Flexible Copper Clad Laminate (FCCL)、Triplex

	Exposure Layer	Exposure Alignment accuracy	Maximum Size	Maximum Capacity	Minimum. Trace Width (L/S)
MANUAL INNER/OUTER LAYER UV LED EXPOSURE SYSTEM	Double-sided	100um	350*450mm	144Panel/hr	75um/75um
AUTO INNER/OUTER LAYER COLLIMATED UV EXPOSURE SYSTEM	Double-sided	60um	350*450mm	102Panel/hr	75um/75um
AUTO INNER LAYER UV LED EXPOSURE SYSTEM	Single side	60um	420*250mm	90Panel/hr	75um/75um

Etching

Processed Material: Flexible Copper Clad Laminate (FCCL)、Triplex

Maximum Size:500*500mm

Maximum Capacity:250Panel/hr

Developing: Remove the un-polymerized dry film on the copper foil that has not been exposed to ultraviolet rays.

Etching: Remove the copper without dry film on the copper foil.

Stripping: Remove the dry film on the circuit that has polymerized due to ultraviolet irradiation

Lamination

Processed Material: Cover layer、EMI Film、PI Stiffener、FR4 Stiffener、SUS Stiffener

Maximum Size:
Vacuum Lamination Press Series: 320*500mm
80TON Vacuum Laminator: 250*420mm
100TON Vacuum Laminator: 440*500mm

Routing /Milling

Processed Material: Bakelite board、acrylic、Stononlead、Light Guide flim、Overlay、LENS、spacer、FR4、Shield、light stopper、diffuser

Maximum Size:450*420mm